pearl white PVC panel

Print panel with pearly lustre on the surface. We can produce this panel in any specification as you demand.

1. PVC Panel Specification:

(1)Thickness: 5.5mm, 6mm, 7mm, 7.5mm, 8mm, 8.3mm, 8.5mm, 9mm, 9.5mm, 12mm.

(2)Width: 10cm, 16cm, 20cm, 19cm, 25cm, 30cm, 60cm

(3)Length: 5.80m(for 20'GP),5.95m(for 40'GP/40'HQ) or as per customer’s requirements

(4)PVC%: 40%, 45%, 50%

(5)Colors and patterns: Hundreds of colors and patterns for you to choose or according to your specific designs

2. Features:

1) Easily assembled, surface even, no gap when concatenated.

2) High intensity, corrode-resisting, aging-resisting, durable for more than 30 years.

3) fire-proof, antibiotic, healthy and environment friendly.

4) The surface picture is clear and adhesive.

5) For ceiling and wall decoration.

6) More than 200 specifications, 3000 article pictures.

3. Certificates:

"RoHS"". "ISO9001: 2008".

OUR STANDARD:

a) Appearance

    Any defect such as concavo convex, bruise, deforming, impurity, chromatism, uneven brightness that will affect usage of the panel is not allowed.

b) Colour and pattern

    Determined by the negotiation of buyers and sellers.

c) Bow

    Bow of panel side should be less than 1.5mm/sqm.

d) Length deviation

    Negative deviation not allowed.

e) Thickness

    Not less than 0.3mm/sqm.

f)  Physical and chemical properties

    See the table below.

Serial	Item	Target
		Ordinary panel	Fire resistant panel
1	Rate of size change after heating,%	≤3.0
2	State after after heating	Bubble, crackle, pock and etc. Not allowed
3	Acetone endure	No visible defect
4	Falling weight test	pass
5	Rate of size change in high-and-low-temperature,%	±0.2
6	Nail endure	No split
7	Oxygen index	≥30	≥35
8	Horizontal firing,grand	-	I
9	Vertical burning(self-extinguish),grand	-	FV-0

 

HOW TO CHOOSE PVC PANELS

a)  Watching

      The surface should be even and beautiful. Colour and patterns should be in harmony with where to decorate. Panels with bright and single colour and clean patterns are better for ceiling usage. For toilet decoration, the stripe shaped panels are most preferred , while kitchen, the stripe or grid shaped.  

b)  Checking the tongue and groove

      The cut of PVC panels looks like honey comb. It should be clear and sharp. Tongue and groove are on the two sides of finished panels. When install the tongue into the groove, no gap is allowed , and the surface should be even as one complete panel. If installing is not easy , the panels are surely of poor quality.

c)  Bowing the panel

     When bowing the panel , no break should occur and you can feel the elasticity. Clear, euphonious and beautiful sounds when knocked on the panel proves the good quality of the panel.

Finally, a stable supplier with good faith and sense of responsibility is a fundamental guarantee of the quality of panels. You will find that we are just the one!  

pearl white PVC panel